Using prebuilt coils is the best way to avoid tedious time-consuming work of coiling. This is where the Wotofo prebuilt coils comes in to provide the convenience for rebuilders who may not in the mood of wrapping your coils by hand at times. The resistor is made of Ni80 wire with a diameter of 3mm and an ohmic resistance 0.38ohm.

Using prebuilt coils is the best way to avoid tedious time-consuming work of coiling. This is where the Wotofo prebuilt coils comes in to provide the convenience for rebuilders who may not in the mood of wrapping your coils by hand at times. The resistor is made of Ni80 wire with a diameter of 3mm and an ohmic resistance 0.9ohm.

The use of Premade coils is the best way to avoid the tedious and time-consuming process of building coils. The coil is made of Ni80 wire with a diameter of 3mm and resistance of 0.5ohm.

The use of Premade coils is the best way to avoid the tedious and time-consuming process of building coils. The coil is made of Ni80 wire with a diameter of 3mm and resistance of 0.22ohm.

Using prebuilt coils is the best way to avoid tedious time-consuming work of coiling. This is where the Wotofo prebuilt coils comes in to provide the convenience for rebuilders who may not in the mood of wrapping your coils by hand at times. The resistor is made of N80 wire with...

The staple coil is a 8 ply ribbon wire wrapped with 36ga wire.This variation of the fused Clapton has a quicker ramp-up time due to the stacked ribbon cores. The tiny grooves in between the wraps trap e-juice and contribute to its enhanced flavor.

The SS316 NexMesh measures 16mm by 6.8mm for a value of 0.15Ω. Evolve your flavor experience. Explore the next generation of mesh coil design with nexMESH triple density gird mesh. Uniform mesh weave with 3x more holes delivers rapid power transfer for lightening fast heating with less spit back.

New wires from Coilology with unique taste performance. Specially designed for MTL use.

The MTL 4-in-1 Prebuilt Coils Set is collectively crafted for Mouth-to-Lung builders looking for a range of coil builds with the convenience of pre-coiled setting. Each coil is machine-twisted for precise and consistent building material, presenting different types of structures optimized for flavor recreation and vapor-orientated...

Handmade coils SK Coils Legacy Alien 28G 3x28+38 2,5ø 0.13Ω .

Handmade coils SK Coils MTL Staple 4x0.2/42 - 2.5ø 0.74Ω .

 Replacement Micromesh KA1 0.2ohm for GeekVape Zeus X Mesh RTA .